Smith and Wesson M&P 2.0 DOGTAG Optic Plate
Smith and Wesson M&P 2.0 DOGTAG Optic Plate
Smith and Wesson M&P 2.0 DOGTAG Optic Plate
Smith and Wesson M&P 2.0 DOGTAG Optic Plate
Smith and Wesson M&P 2.0 DOGTAG Optic Plate
Smith and Wesson M&P 2.0 DOGTAG Optic Plate
Smith and Wesson M&P 2.0 DOGTAG Optic Plate
Smith and Wesson M&P 2.0 DOGTAG Optic Plate
Smith and Wesson M&P 2.0 DOGTAG Optic Plate
Smith and Wesson M&P 2.0 DOGTAG Optic Plate
Smith and Wesson M&P 2.0 DOGTAG Optic Plate
Smith and Wesson M&P 2.0 DOGTAG Optic Plate
  • Load image into Gallery viewer, Smith and Wesson M&P 2.0 DOGTAG Optic Plate
  • Load image into Gallery viewer, Smith and Wesson M&P 2.0 DOGTAG Optic Plate
  • Load image into Gallery viewer, Smith and Wesson M&P 2.0 DOGTAG Optic Plate
  • Load image into Gallery viewer, Smith and Wesson M&P 2.0 DOGTAG Optic Plate
  • Load image into Gallery viewer, Smith and Wesson M&P 2.0 DOGTAG Optic Plate
  • Load image into Gallery viewer, Smith and Wesson M&P 2.0 DOGTAG Optic Plate
  • Load image into Gallery viewer, Smith and Wesson M&P 2.0 DOGTAG Optic Plate
  • Load image into Gallery viewer, Smith and Wesson M&P 2.0 DOGTAG Optic Plate
  • Load image into Gallery viewer, Smith and Wesson M&P 2.0 DOGTAG Optic Plate
  • Load image into Gallery viewer, Smith and Wesson M&P 2.0 DOGTAG Optic Plate
  • Load image into Gallery viewer, Smith and Wesson M&P 2.0 DOGTAG Optic Plate
  • Load image into Gallery viewer, Smith and Wesson M&P 2.0 DOGTAG Optic Plate

Smith and Wesson M&P 2.0 DOGTAG Optic Plate

$64.99
$64.99
Sold out

M&P 2.0 Optic Plates made by Calculated Kinetics are a great upgrade from the factory provided plates. Tighter tolerances, better screws, and a built-in deflection table to reduce carbon by 75% why would you get any other optic plate? 

FITS M&P 2.0, COMPACT, FULL SIZE, CARRY COMP, COMPETITOR, SPEC V SERIES AND ANY MODEL THAT HAS THE CORE 2.0 CUT. 

CA COMPLIANT MODELS-  Only the 509 plate fits the 509 and works with the gun in the OEM configuration. You can run all other plates if you delete or remove the LCI. Please make sure this is legal! 

RMSc/K Footprint/EOTech EFLX CE-

  • 7075 hard anodized
  • Co witness with OEM Optics Ready Iron Sights Lower 1/3rd. Video- Click here for EPS Carry
  • Co witness with OEM Optics Ready Iron Sights Lower 1/5th. Video- Click here for CCW
  • For a lower 1/3rd on the CCW Enclosed and EOTech EFLX CE recommend the SW-524 click here. Video click here
  • Metal or Carry Comp recommend SW-429s Click Here. Co witness will be same as videos above, just all black iron sights
  •  6-32 X 13.2MM Oval Head included. For spares click here

Holosun EPS-

  • 7075 hard anodized
  • Co witness with OEM Optics Ready Iron Sights Lower 1/3rd. Video click here
  • Metal or Carry Comp recommend SW-429s click here for lower 1/4th co witness video click here
  • 6-32 X 5/16 Mounting Screws in clear bag included to mount plate to gun. For spares click here
  • M3 X 9MM in blue bag included to mount optic to plate. For spares click here

RMR Footprint-Holosun 407C/407 Comp/507C/507 Comp/508T/Trijicon RMR/RMR Type 2/RCR/Osight C/X-

  • 7075 hard anodized
  • Co witness with OEM Optics Ready Iron Sights Lower 1/4th to 1/3rd. Video click here
  • Metal or Carry Comp recommend SW-429s click here for lower 1/3rd co witness video click here
  • 6-32 X 11.3MM in blue bag for Holsoun and Osight included. For spares click here
  • 6-32 X 0.5" in red bag for Trijicon included. For spares click here.
  • Trijicon RCR will not co witness with OEM Optics Ready Iron Sights, you need XS R3D click here. Co witness with the XS R3D and RCR on our DOGTAG lower 1/5th video click here
  • For a lower 1/8th all black, we recommend the Ameriglo SW-524 click here. Video click here
  • The RCR require longer Capstan screws from Trijicon and can be found here- AC30015 | Trijicon®

Why do we have 2 different RMR Footprint optic plates? Watch this video- click here

SRO/RMR HD/507 Promax/Osight XR/XE/Gideon Omega/Forward protruding optics-

  • 7075 hard anodized
  • Co witness with OEM Optics Ready Iron Sights list- Holosun 507 Promax lower 1/4th, Osight XR (not XE), lower 1/5th, Trijicon SRO and RMR HD barely usable. If your optic is not listed, it does not co witness
  • For lower 1/5th recommend the Ameriglo SW-524s click here. Video click here
  • For co witness you need XS R3D iron sights click here. For video click here
  • 6-32 X 11.3MM in blue bag for Holsoun and Osight included. For spares click here
  • 6-32 X 0.5" in red bag for Trijicon included. For spares click here
  • Mecanik M03 and Gideon Omega you will separate screws click here

509T/AEMS Macro-

  • Heat treated 17-4 Stainless Steel
  • Co witness with OEM Optics Ready Iron Sights Lower 1/6th. Video click here
  • For a lower 1/3rd for AEMS Macro and lower 1/5th for 509T X2 recommend Ameriglo SW-524s click here. Video click here
  • 6-32 X 0.3125" PH2 Head 100 Degree in clear bag included. For spares click here

ACRO/ACRO Footprint/AEMS Micro-

  • 7075 hard anodized
  • Co witness with OEM Optics Ready Iron Sights Lower 1/6th. Video click here
  • For a lower 1/4th recommend Ameriglo SW-524s click here. Video click here
  • 6-32 X 0.3125" PH2 Head 100 Degree in clear bag included. For spares click here
  • Steiner MPS plate is identical, it comes with a 3D printed insert to fill the gap between the DOGTAG and the front of the optic on version 1.0. Version 2.0 insert coming soon. Video click here

DUTY DPP Footprint-Vortex ST/ST Enclosed/Venom Enclosed/DPP/Holosun SCS 320/Romeo-X Pro/SIG Romeo 1 Pro/Osight SE DPP-

  • Heat treated 17-4 Stainless Steel
  • Co witness with OEM Optics Ready Iron Sights list- Holosun SCS 320 Lower 1/4th Romeo-X Pro Lower 1/3rd, Osight SE DPP lower 1/5th. Vortex ST/ST Enclosed barely usable If your optic is not listed, it does not co witness.
  • For taller co witness you need XS R3D iron sights click here. For video click here
  • For a lower 1/5th all black we recommend the Ameriglo SW-524s click here. Video click here
  • 6-32 X 0.3125" PH2 Head 100 Degree in clear bag included. For spares click here
  • M3 X 8MM in blue bag are included. For spares click here
  • M3 X 14MM in red bag (For Delta Point Pro only) are included. For spare click here

Why do we have 2 different DPP Footprint optic plates? Watch this video- click here

COMP DPP Footprint-Vortex XL/Vortex ST/ST Enclosed/Venom Enclosed/DPP/Holosun SCS 320/Romeo-X Pro/SIG Romeo 1 Pro/EOTech EFLX/Osight SE DPP-

  • Heat treated 17-4 Stainless Steel
  • Co witness with OEM Optics Ready Iron Sights list- Holosun SCS 320 Lower 1/4th Romeo-X Pro Lower 1/3rd, Osight SE DPP lower 1/5th. Vortex ST/ST Enclosed barely usable If your optic is not listed, it does not co witness.
  • For taller co witness you need XS R3D iron sights click here. For video with Vortex XL click here
  • 6-32 X 0.3125" PH2 Head 100 Degree in clear bag included. For spares click here
  • M3 X 8MM in blue bag are included. For spares click here
  • M3 X 14MM in red bag (For Delta Point Pro only) are included. For spare click here

Duty Holster Compatability-

  • Bladetech Valor- Valor Duty Holster Builder. No issues
  • Safariland holsters we believe manufactured after the 51st week of 2025 (labeled as 51/25 on your holster.
    • 6360 full size light. SRO and COMP DPP Footprint require modifications.
    • 6390 full size light. SRO and COMP DPP Footprint require modifications.
    • 6354 W/TLR 7. SRO and COMP DPP Footprint require modifications
  • Aliengear Rapid Force
    • Level 2 with light
      • Only our 509 DOGTAG will work
    • Level 3 with light
      • Works on all except SRO and COMP DPP Footprint and it is not modifiable.
  •  If you purchase a DOGTAG and have a duty holster retention issue, we will issue a 100% refund. If you know of a combo that we can add to the list, please let us know to help the next guy!

As always, included with the plate is hardware to mount it, Torx Bit, and a small tube of Vibratite to complete the job.

Different guns cycle at different rates and different forces. Some screws are thicker than others and hold optics and plates of different weights. We recommend replacing screws every 10,000 rounds to minimize risk and a potential screw failure.